Explore our top-tier specialized transportation solutions, encompassing multi-compartment auger trailers, automated climate transporters, and intelligent poultry equipment manufactured to rigorous ISO 9001 and biosecurity mandates.
In modern industrial livestock integration—where mega-farms accommodate tens of thousands of sows or millions of broilers—the supply chain interface between feed mill production and biosecure silo storage represents a mission-critical vector for economic performance and pathogen risk mitigation. Xinbaiqin Special Vehicle Co., Ltd. (associated with CP M&E, the engineering pillar of Charoen Pokphand Group) manufactures the internationally recognized GoldBees series of feed conveyance transporters. These vehicles are engineered directly out of multi-decade farming operations rather than theoretical drawing boards, addressing the three pivotal KPIs demanded by agribusiness conglomerates: structural durability, zero cross-contamination biosecurity, and lowest total cost of ownership (TCO) per delivered metric ton.
Conventional conveyance trailers often suffer from structural shearing under dynamic torsional road stress, uneven product segregation during auger discharge, and electrical failures triggered by harsh alkaline thermal sanitation washdowns. GoldBees resolves these vulnerabilities by utilizing high-tensile 6061-T6 and 5083 aerospace-grade aluminum alloys, robotic longitudinal seam welding, and self-cleaning multi-compartment hopper geometries. By stabilizing discharge pressure and minimizing auger velocity spikes, GoldBees transporters preserve the structural integrity of pelleted feed formulations, reducing costly "fines" (dust pulverized feed) to below 0.12% across varied discharge heights reaching up to 14 meters.
Third-party metallurgical and kinematic simulations reveal that mechanical auger impact and friction against hopper walls can generate localized temperature increases above 45°C, causing thermo-sensitive vitamin breakdown and pellet crumbling. GoldBees equips variable-pitch progressive flight augers powered by proportional hydraulic drives, minimizing inter-pellet shearing stress while maintaining rapid discharge capacities exceeding 1.8 to 2.5 metric tons per minute.
Furthermore, the operational requirements of the Charoen Pokphand Group supply chain necessitate that every vehicle design withstand rigorous terminal sanitation. GoldBees feed conveyance tanks feature mirror-polished internal surfaces without blind crevices, automated CIP (Clean-In-Place) rotary spray options, and exterior wiring systems enveloped within IP69K-rated sealed conduit lines. This prevents disease vectors like African Swine Fever (ASF) and Highly Pathogenic Avian Influenza (HPAI) from establishing footholds within chassis joints or tank transitions.
Operating from our 66,667 m² specialized manufacturing campus in Cixi, Zhejiang, Xinbaiqin integrates complete upstream metallurgical supply with state-of-the-art robotic chassis assembly.
Unlike regional assemblers reliant on multi-tiered subcontracting, Xinbaiqin stamps, laser-cuts, rolls, and welds aluminum tanks, auger screws, and chassis beams on our own CNC lines. This unified production footprint guarantees strict dimensional tolerances under ±0.5 mm and eradicates supply lead-time volatility.
Inheriting more than 15 years of operational intelligence from Thailand’s Charoen Pokphand Group, our design iterations undergo harsh real-world stress testing across hundreds of company-owned breeding complexes and mills prior to broad international commercial deployment.
Through Zhejiang's deep structural manufacturing cluster and advanced automated welding rigs, our custom-engineered transporters deliver 25% to 40% capital expenditure savings compared to European or North American counterparts, while offering equal or superior operational payloads.
International logistics demands strict adherence to axle weight distribution limits, regional braking certifications, and localized terrain characteristics.
Customized kingpin placements, tri-axle air suspensions with automatic front lift, and EBS/ABS configurations conforming to European ECE-R13 and US FMVSS regulations ensure street-legal status on major highway corridors.
Whether your enterprise relies on Scania, Mercedes-Benz, Volvo, MAN, Isuzu, or Chinese platforms such as FAW, Sinotruk, and Shacman, our factory supplies bolt-on subframes and pre-calibrated PTO interfaces for trouble-free local mounting.
Our multilingual field-support engineering teams provide virtual diagnostic handshakes, localized technical training for fleet mechanics, and immediate containerized dispatch of genuine replacement hydraulic seals, bearings, and auger drives.
All tank seams and discharge ducts feature continuous sanitary TIG weld beads without blind pockets. They are fully compatible with quaternary ammonium compounds, peracetic acid sprays, and automated dry-baking thermal stations up to 75°C.
| Conveyance Category | Discharge Mechanism | Effective Volume Range | Target Material Granulometry | Discharge Throughput | Biosecurity Level |
|---|---|---|---|---|---|
| Electric/Hydraulic Auger Semi-Trailer | Triple Auger Articulated Tower (360° Hydraulic Slewing) | 40 m³ – 75 m³ (Multi-Hopper) | Pelleted Feed (2.5mm–6.0mm), Mash, Extruded Pellets | 1.8 – 2.4 Tons / Min | High (Sealed Compartment Isolation) |
| Intelligent Pneumatic Tanker | Oil-Free Rotary Screw Air Compressor (0.2 MPa) | 30 m³ – 55 m³ (Fluidized Bed) | High-Fat Pellets, Powders, Concentrates, Fine Meals | 1.2 – 1.6 Tons / Min | Maximum (Hermetic Aerated Transfer) |
| NEV Electric Feed Transporter | Synchronous Motor Direct-Drive Auger | 25 m³ – 45 m³ (Rigid Chassis) | Poultry Crumbles, Swine Finisher Pellets | 1.5 – 2.0 Tons / Min | Maximum (Zero Tailpipe Farm Emissions) |
| Automated Livestock Transporter | Climate Managed Multi-Deck Floor Lift System | 2 to 4 Deck Configurations | Piglets, Fattened Hogs, Day-Old Chicks, Broilers | Hydraulic Tailgate Ramp (3,000 kg) | Ultra-Biosecure (HEPA Intake + Thermal CIP) |
Agribusiness transport is shifting from simple mechanical hauling toward electrified, sensor-monitored, data-connected biological distribution fleets.
Internal combustion engine idling inside enclosed farming complexes presents a critical respiratory hazard to livestock and contravenes ESG mandates. GoldBees NEV electric transporters enable zero-emission silent discharge operations directly powered by the vehicle's high-capacity battery bank, slashing fuel burn and noise distress.
Each compartment can be integrated with dynamic load-cell modules, pneumatic moisture alarms, and auger rotation RPM feedback. Integrated 4G/5G telematics communicate directly with enterprise ERP frameworks (such as SAP or farm-specific management suites) to authenticate delivery weight, silo destination, and sanitary cycle status.
Modern vertical high-rise pig buildings and multi-tier broiler complexes demand rapid vertical delivery to silos located at high elevations. GoldBees heavy hydraulic boom augers articulate to extended discharge angles of up to 65 degrees, reaching vertical elevations of 11 to 14 meters with zero auxiliary support equipment.
A multi-year operational audit conducted across intensive swine and layer operations demonstrated that transitioning from legacy bag handling or steel auger trailers to GoldBees lightweight aluminum alloy transporters generated immediate efficiency gains. Fleet tare weight reductions of 1,800 to 2,400 kg allowed operators to transport equivalent daily tonnages with 14% fewer total highway trips. Over a 5-year operating lifespan per vehicle, the resulting savings in diesel, tire wear, and biosecurity sanitation labor fully amortized the capital acquisition delta.
Clear, technically grounded answers addressing the engineering, commercial, and operational queries of global corporate procurement officers.
Xinbaiqin Special Vehicle Co., Ltd. manufactures a complete spectrum of agricultural logistics units under the GoldBees brand, including electric/hydraulic auger bulk feed trucks and semi-trailers, intelligent pneumatic bulk feed tankers, NEV electric feed delivery trucks, multi-deck temperature-managed swine transporters, day-old chick/layer transporters, automated broiler trailers, refrigerated cold-chain trucks/trailers, and specialized farm equipment like automated chicken harvesters.
Auger conveyance utilizes mechanical screw flighting to elevate pelleted feeds smoothly with minimal shear and low air consumption, making it ideal for fragile pelleted rations where fine creation must stay under 0.15%. Pneumatic discharge uses pressurized oil-free airflow to fluidize materials, making it ideal for powdery premixes, high-fat feeds, and transferring into towering silos (over 15m) without overhead mechanical arm positioning.
Yes. We regularly build bodies on chassis supplied by European makers (Volvo, Scania, Mercedes-Benz, MAN) and Asian brands (Isuzu, Hino, FAW, Sinotruk). We customize overall wheelbases, kingpin setbacks, axle weight allocations, under-ride safety guards, and braking connections to comply with North American DOT, European ECE, Australian ADR, and GCC Gulf standards.
Our tanks are engineered with zero-dead-angle internal compartments, full-penetration robotic TIG welds, and seamless internal surfaces that resist bacterial and viral biofilm accumulation. Electrical harnesses and pneumatic control cabinets are rated to IP69K to withstand high-pressure, high-temperature washdowns (85°C) and corrosive chemical sanitizers such as glutaraldehyde and sodium hypochlorite.
Standard custom configurations have a production cycle of 25 to 45 business days. We support multiple export modalities, including fully built-up (FBU) units shipped via Ro-Ro (Roll-on/Roll-off) or flat rack containers, as well as Semi-Knocked-Down (SKD) kits inside 40ft High Cube containers. SKD shipments allow local partner workshops to save on import tariffs and ocean freight costs.
GoldBees is manufactured by Xinbaiqin Special Vehicle Co., Ltd. in Cixi, Zhejiang, in close technical collaboration with CP M&E, the engineering and electromechanical branch of Thailand's Charoen Pokphand Group. Every model is supported by a dedicated technical engineering staff of over 30 specialists and validated by rigorous internal farm operations across Asia.
Review our second series of high-performance specialized logistical assets, including NEV clean-energy feed platforms, pneumatic tankers, and intelligent live poultry handlers.
